This is a ground level deck build in Manchester designed with Grey Anthracite composite deck boards.
This is a ground level timber deck build in Manchester designed with Redwood pressure treated deck boards. The timber deck boards are layed both vertically and horizontally.
.png/:/cr=t:2.83%25,l:0%25,w:100%25,h:94.34%25/rs=w:600,h:300,cg:true/qt=q:1)
A good deck builder can transform any outdoor space into a valued and magical area for entertaining, and decking is the ideal structure for sloping sites and difficult terrain. The complexity of build varies depending on the site, height from the ground and load-bearing requirement.
Deck structures can adapt to any site and there are 4 types for considering decking design and decking build.
If you prefer to discuss any of your deck builder project over the phone then ring Kevin now on 07415 723862
As you can see the framework is raised and the total height is more than 600mm from the ground. The sub-structure joists are supported on beams andposts which are cemented into the ground. The joist are 50 x 200mm (2" x 8") pressure treated timber.
During the deck build it is important that the framework is level and square so the deck boards lay flat and aligned later in the deck build.
This is an example of framing for a ground level deck build. The beams and joists are 50 x 150mm (2"x 6") pressure treated timber and are at the same level. This deck structure is designed for timber deck boards which will lay on top of the joist.
Our deck design and deck build conform with a guidance of code of practise established by the relevent British Standard practises to achieve long life and load bearing capability.
Correct choise of materials can resist corrosion and extend the life of your deck build. We use:-
Our No 1 goal is to provide exceptional customer satisfaction. We aim to understand your needs and what you require from your deck builder. To discuss your new deck build ring Kevin now on 07415 723862
The end grain of a piece of sawn timber decking is a commonly a forgotten area that many forget to treat, thus it being one of the most vulnerable areas for rot and decay. Decking End Grain Protector prevents the cut ends of your decking from rotting and decaying helping your deck to last longer.
In this deck build in Manchester we have used Ronseal Decking End Grain Protector which is designed specifically for this area, ensuring that all of your timber decking is fully protected.
Hot dipped galvanised steel hangers are used to make secure joints between joists and beams or joists and ledger boards and are highly resistant corrosion.
This example is a deck build in Oldham where the joist are secured to a support beam adding strengh to the sub-structure